The AXIS MFG "MUTE" is manufactured from 100% hardened 17-4 Stainless Steel (190KSI tensile strength) for extreme duty and high volume shooting in all rimfire cartridges. No aluminum to damage by either excessive shooting or lack of cleaning! Designed for up to 9 length configurations, it allows the user to tune the weight and desired suppression level to their liking. It is built to run and run.
Clean it or not... it will take it. Go ahead, scrape off the baffles with your pocket knife. The MUTE doesn't care!
A 100% no-fault lifetime warranty comes standard, as with all of our products. If you kill it, we fix it, no BS!
Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar no toxic gel) on all internal parts before reassembly. The wipe can easily be replaced as a repair item by you or a gunsmith.
- Rated for: 22LR, 22WMR, 17HMR, 17WSM, 5.7x28, 22 hornet (no barrel length restrictions)
- Configuration Lengths: 6.5" approx 0.47" per baffle (CONFIGURE FROM 1 to 10 BAFFLES!!!)
- Configurations Weights: 7.4oz whole assembly, each baffle weighs 0.6oz
- 100% Hardened 17-4 SS (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressures
- Baffles seal to each other via tapers for concentricity
- BLACK NITRIDE FINISH for even easier cleaning and durability (new as of summer 2021)
- Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T63 and Punch 3427a17)
- REMOVE WIPE FOR ALL OTHER CARTRIDGES EXCEPT 22LR RIMFIRE!
- Full Auto rated
- Easy to service and reconfigure
- Easy to own
- 100% no-fault warranty, valid across the known universe and until the end of time
- Won't break the bank
FFL TERMS AND CONDITIONS
This is a controlled item and requires shipping to an authorized and valid Federal Firearms License (FFL) holder.
If you have a copy of the FFL, please email it to admin@axismfgcnc.com
If you do not have a copy of the FFL but you do have the dealer's email address, please add it in the comments field at checkout. It may help us acquire a copy of the FFL and get your order shipped out more quickly.
Please Note: All items in this order will be shipped together. If you have non-FFL items on this order that you would like shipped directly to you, please place them on a separate order.
There will be a 50% restocking fee for all controlled items returned due to a failed background check or a denied underage purchase.
Federal law requires that you be 21 years or age or older to purchase a stripped receiver or frame. If a frame or receiver can only be made into a long gun (rifle or shotgun), it is still a frame or receiver not a handgun or long gun. However, they still are "firearms" by definition, and subject to the same GCA limitations as any other firearms. See Section 921(a)(3)(b). 18 U.S.C. Section 922(b)(1) makes it unlawful for a licensee to sell any firearm other than a shotgun or rifle to any person under the age of 21.
